With a solid aluminum construction the 2.4GHz Outdoor Signal Booster is designed to give a massive boost in range for a standard 802.11 b/g wireless signal. The outdoor unit amplifies the signal of any 802.11b/g device for up to 30dBm(1Watt) in power. That means your AP or Wireless Router can easily reach over 20 kilometers point to point with an 18dBi antenna in the open space. Several models with different output level (1W, 4W) are available to fit your operating environment.
Features :
Enlarge wireless signal indoor environments!
- High Gain, High Value and High Performance/ Auto Gain Signal Booster
- Amplify and AP's radio signal to 30dBm or more
- Make broadband wireless application in possible coverage
- Increase AP's receiving sensitivity up to -100dB
- Increasing radio communication range by providing transmit gain as well as low-noise receive gain.
- Case aluminum construction/weather-proof/ Lightning protection
- This device can add strength radio signal to increase the effective range and coverage area for Wi-Fi communication.
- Simply attach the DC Injector with 2.4GHz radio signal input plus the DC power feed to the outdoor unit and N type antenna.
- The outdoor booster increase range by providing transmit gain as well as low noise receive gain.
- The benefit for signal booster can save lots of wiring costs and easy to build wireless infrastructure for home or business use.
Specification :
Model Name | ARG1205b |
Operating Range | 2400~2500 MHz |
Operating Mode | Bi-directional, half-duplex, auto-switching via carrier sensing |
Connector Type | N-type, female (50 ohm) |
Transmit Gain | 18~24dB |
Tx Input Power | 0 ~20 dBm |
Output Power | 1W(30dBm) / 4W(36dBm) nominal |
Receiver Gain | 15 dBi Typical |
Noise Figure | 3.5dB typical |
Frequincy Response | ±1 dB over operating range |
Power Adaptor | 7~9V /DC 110/220V /AC auto switching AC Adapter for DC Injector |
Operating Temp. | -20° to +70° |
Operating Humidity | Up to 95% relative humidity |
Booster Material | Cast Aluminium |
Lightning Protection | Direct DC ground at antenna connector |
DC Surge Protection | At DC input from transmission cable |
Outdoor Unit (cm) | 11.5cm(L) x 6.5cm(W) x 4.8cm(H) |
DC Injector (cm) | 10.2cm(L) x 3.6cm(W) x 2.6cm(H) |
Package Contens | An Outdoor unit, the bi-directional booster DC Injector x1 7 ~ 9 V/DC 110/220 V/AC power adapter x1 SMA Male RP to N male RG316 cablex1 Installation Guide |
Package Weight | 3 Lbs |